Overview
IES7511-8GE4TF-DC, 8 Port Gigabit Industrial Managed Ethernet Switch with 4-10Gb SFP+ Uplink,DIN-Rail mount,Support ERPS
-
Physical Port
8-10/100/1000BASE-TX Fast Ethernet RJ45 ports4-1G/2.5G/10GBASE-X mini-GBIC/SFP+ slot1-RJ45 console interface for switch management and setup1-Reset button for system factory default and reboot1-USB interface for switch setupSwitchingBackplane bandwidth 128Gbps,Packet forwarding rate 71.42Mpps,MAC address 16kHardware-based 10/100/1000Mbps (half/full duplex) auto-negotiation and auto MDI/MDI-XFeatures Store-and-Forward mode with wire-speed filtering and forwarding ratesIEEE 802.3x flow control for full duplex operation and back pressure for half duplex operationHardwareIndustrial Case and InstallationIP40 High- strength Aluminum caseDIN-rail mount design12~56V DC, redundant power with reverse polarity protectionSupports 8KV DC Ethernet ESD protection-40 to 85 degrees C operating temperatureLED indicators for Power,and LINK/ACTMechanical PropertiesIEC60068-2-6:Anti VibrationIEC60068-2-32:Free FallIEC60068-2-27:Anti Shock -
Lightning Protection
IEC61000-4-3 (RS):10V/m (80~1000MHz)FCC Part 15/CISPR22 (EN55022):Class BIEC61000-6-2:Common Industrial StandardIEC61000-4-9 (Pulsed magnet field) :1000A/mIEC61000-4-10 (Damped oscillation) :30A/m, 1MHzIEC61000-4-12/18 (Shockwave) :CM 2.5kV, DM 1kVIEC61000-4-4(EFT):Power cable:±4kV, Data cable: ±2kVIEC61000-4-16(Common-mode transmission) :30V, 300V, 1sIEC61000-4-2 (ESD):±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (Radio frequency transmission) :10V(150kHz~80MHz)IEC61000-4-8 (Power frequency magnetic field) :100A/m, 1000A/m, 1s-3sIEC61000-4-5 (Surge) Power cable:CM±4kV/ DM±2kV, Data cable: ±4kVSecuritySupport IEEE 802.1xSupport RADIUS accountingSupport Access Control Lists (ACLs)Support MAC SecuritySupport IP Source Guard prevents IP spoofing attacksSupport DoS Attack PreventionSupport aaa authenticationLayer 3 FeaturesSupport Static routingSupport RIPSupport OSPFSupport VRRP -
Layer 2 Features
Support IEEE 802.1Q VLANSupport MAC VLANSupport Surveillance VLANSupport Voice VLANSupport QinQ VLANSupports Spanning Tree ProtocolSupports Link Aggregation (LACP)Supports port mirrorSupports Multicast Filtering (IGMP)Supports DHCPSupports ERPSSupports RMONSupports MLD snoopingSupports MVRSupports UDLDSupports Quality of Service (Qos)Supports Static routingSupports Port Error DisableSupports Rate LimitSupports Storm ControlManagementIPv4 and IPv6 dual stack managementWeb switch managementConsole/Telnet Command Line InterfaceSNMP v1 and v2c switch managementSSHv2, TLSv1.2 and SNMP v3 secure accessFirmware upload/download via HTTP/TFTPConfiguration upload / download through Web interfaceHardware reset button for system reboot or reset to factory defaultSNTP Network Time ProtocolNetwork DiagnosticLink Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
Features
Layer 2 and Layer 3 Managed Capabilities
The IES7511-8GE4TF-DC offers robust Layer 2 and Layer 3 management features, providing flexible control over network configurations. Layer 2 capabilities like VLAN, Spanning Tree Protocol (STP), and Link Aggregation (LAG) help optimize network traffic and improve security, ensuring that data is routed efficiently within local networks. Layer 3 static routing enables inter-network communication, supporting more complex topologies and boosting performance for mission-critical applications. These features empower users to design scalable, secure, and high-performance networks tailored to industrial environments.
4 10Gb SFP+ Uplink Ports
Equipped with 4 10Gb SFP+ uplink ports, the IES7511-8GE4TF-DC provides high-bandwidth connections for backbone networks, ensuring ultra-fast data transmission and minimal latency. The 10Gb SFP+ ports are ideal for linking the switch to other high-performance devices, servers, or network infrastructure, supporting large data flows in demanding environments. Whether used for industrial automation, smart factories, or large-scale security systems, the 10Gb uplinks help ensure smooth, efficient communication across the network, even during high-traffic periods.
ERPS Ring Network for Redundancy and Fast Recovery
The IES7511-8GE4TF-DC supports Ethernet Ring Protection Switching (ERPS), which provides network redundancy and fast recovery times in the event of link failures. The ERPS functionality ensures a recovery time of less than 50 milliseconds, minimizing downtime in industrial networks where continuous uptime is critical. This is particularly important for applications like automation, security surveillance, or any system reliant on a consistent and stable network. ERPS ring topology ensures that your network remains resilient and fault-tolerant, even in the face of unexpected failures.
Rugged IP40-Rated Enclosure
Built to endure the harsh conditions of industrial environments, the IES7511-8GE4TF-DC features a rugged IP40-rated enclosure that provides protection against dust and debris. This feature is vital for installations in factories, outdoor areas, or warehouses, where exposure to particles and contaminants is common. The sturdy design ensures that the switch remains operational and maintains high performance, even when subjected to challenging conditions. This protection enhances the switch’s longevity, making it a reliable choice for industrial and outdoor network installations.
Wide Operating Temperature Range (-40°C to 85°C)
The IES7511-8GE4TF-DC is designed to operate in extreme temperature conditions, with a wide operating temperature range of -40°C to 85°C. This makes it suitable for use in outdoor or unheated indoor environments where traditional switches might fail due to temperature extremes. Whether deployed in remote locations, harsh manufacturing environments, or outdoor installations, this temperature resilience ensures that the switch performs reliably without risk of overheating or failure, offering peace of mind to users in industries like transportation, energy, and automation.
8KV ESD Protection for Enhanced Stability
The IES7511-8GE4TF-DC includes 8KV Electrostatic Discharge (ESD) protection, safeguarding the switch from potential damage caused by electrostatic discharges. In industrial settings, where static buildup and electrical surges are common, this protection is crucial to maintain the integrity and reliability of network performance. The 8KV ESD protection ensures that the switch operates smoothly, preventing network disruptions or hardware failure that can be caused by electrical interference. This feature is essential in sensitive environments such as factories, power plants, and transportation systems.
Dual Power Inputs for Redundancy
The IES7511-8GE4TF-DC supports dual power inputs (AC 12-54V), providing essential power redundancy to ensure continuous operation even in the event of a power failure. This dual power configuration minimizes the risk of downtime and ensures that the switch remains operational in mission-critical environments. This redundancy is particularly important for industries like automation, control systems, and surveillance, where network reliability is essential. By offering dual power inputs, the IES7511-8GE4TF-DC provides an additional layer of security against power disruptions, ensuring uninterrupted network performance.
Connectivity Solutions
8 port Gigabit Industrial Managed Switch with 4-10G SFP+ Uplink connection Solution
8 port Gigabit Industrial Managed Switch with 4-10G SFP+ Uplink Ring Network Connection Solution
Specification
Технические характеристики :
IE7511-8GE4TF-DCМедные порты 10M/100M/1G RJ45 :
8Порты 1G/2,5G/10G SFP+ (оптоволоконные) :
4Консольный порт (для конфигурации) :
YesUSB-порт :
Yes (for firmware and config upload/ download)Кнопка сброса :
YesТехнические характеристики производительности :
*Буферная память пакетов :
12 MbРежимы переадресации :
Store-and-forwardПропускная способность :
128 GbpsСкорость пересылки пакетов :
71.42MppsРазмер базы данных MAC-адресов :
16KПоддержка больших кадров :
12KСлужбы L2 — VLAN :
*Тегирование VLAN IEEE 802.1Q :
YesМаркировка QinQ VLAN :
YesVLAN на базе IP :
YesVLAN на базе MAC :
YesVLAN на основе протокола :
YesГолосовая VLAN :
YesСопоставление VLAN :
YesУслуги L2 – доступность :
*Контроль шторма :
Yes (Broadcast, multicast, unknown unicast)IEEE 802.3ad — группы LAG (LACP) :
YesИЭЭЭ 802.3x :
YesКольцо (ERPS, соответствует G.8032) :
Yes, Recovery time < 50msПротокол связующего дерева IEEE 802.1D :
YesПротокол быстрого связующего дерева IEEE 802.1w :
YesПротокол множественного связующего дерева IEEE 802.1s :
YesDHCP-реле уровня 2 :
YesСлужбы L2 — фильтрация многоадресной рассылки :
YesОтслеживание IGMP (v1, v2 и v3) :
YesПоддержка отслеживания MLD (v1 и v2) :
YesОпросник отслеживания IGMP (v2) :
YesОтслеживающий запрос MLD (v1) :
YesРегистрация многоадресной VLAN (MVR) :
YesСлужбы L3 — DHCP :
*DHCP-клиент :
YesОтслеживание DHCP :
YesDHCP-сервер :
YesСлужбы L3 — маршрутизация :
*Статическая маршрутизация IPv4 :
100Статическая маршрутизация IPv6 :
100VLAN-маршрутизация :
YesРИП В1/В2 :
YesОСПФ версии 2 :
YesКоличество интерфейсов IP VLAN :
YesПолитика маршрутизации :
YesВРРП :
YesАгрегация ссылок :
*Ручной отставание :
YesКоличество LAG/количество участников в каждой LAG :
8 LAGs with max 8 members in each LAGСлужбы сетевого мониторинга и обнаружения :
*802.1ab ЛЛДП :
YesSNMP :
v1, v2c, v3Группа РМОН 1,2,3,9 :
YesСетевая безопасность :
YesИЭЭЭ 802.1x :
YesRADIUS-учет :
YesСписки контроля доступа (ACL) :
YesACL на основе IP (IPv4 и IPv6) :
L2 / L3 / L4ACL на основе MAC :
YesACL на основе TCP/UDP :
YesУправление статическими записями MAC # :
48Безопасность на основе портов с помощью заблокированных MAC-адресов :
YesДинамическая проверка ARP :
Yesзащита от DoS :
YesПредотвращение DoS-атак :
YesЗащита от сетевых штормов, DoS :
YesКачество обслуживания (QoS) :
*Ограничение скорости на основе порта :
Yes ingress and egressКачество обслуживания на основе порта :
YesПоддержка полей IPv6. :
YesКачество обслуживания ДиффСерв :
Yes ingressКласс обслуживания IEEE 802.1p :
YesMAC и IP назначения :
YesIPv4 и v6 DSCP :
Yesна основе TCP/UDP :
YesВзвешенный круговой турнир (WRR) :
YesТехнология очереди со строгим приоритетом :
YesСетевые протоколы IEEE :
*Протоколы :
• IEEE 802.3 Ethernet • IEEE 802.3u 100BASE-T • IEEE 802.3ab 1000BASE-T • IEEE 802.3af PoE • IEEE 802.3at PoE+ • IEEE 802.3az Energy Efficient Ethernet (EEE) • IEEE 802.3ad Trunking (LACP) • IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LXПротоколы 2 :
• IEEE 802.3x Full-Duplex Flow Control • IEEE 802.1Q VLAN Tagging • IEEE 802.1AB LLDP with ANSI/TIA-1057 (LLDP-MED) • IEEE 802.1p Class of Service • IEEE 802.1D (STP) • IEEE 802.1s (MSTP) • IEEE 802.1w (RSTP) • ITU-T G.8032 (ERPS)Управление, мониторинг и устранение неполадок :
*Управление паролями :
YesКонтроль доступа через RADIUS и TACACS+ :
YesУправление IPv6 :
YesSNMP v1/v2c/v3 :
YesЗеркальное отображение портов :
Yes ingress and egressЗеркальное отображение портов «многие к одному» :
14Утилита для проверки кабеля :
YesДоступ через Интернет TLS/HTTPS (версия) :
Yes (v1.2)Передача файлов (загрузка, скачивание) :
TFTP / HTTPЗагрузка/загрузка HTTP (прошивка) :
YesСистемный журнал (RFC 3164) :
Yesсветодиоды :
YesНа порт :
Speed, Link, Activity; PoE in different modeЗа устройство :
PowerФизические характеристики :
*Размеры (ширина * глубина * высота) :
170 x 148 x 48 mm (6.69 x 5.83 x 1.89 in)Масса :
1.2 kg (2.65 lb)Installation :
DIN-Rail MountingЗащита корпуса :
P40 high-strength aluminum caseТребования к питанию :
AC100~260V 50/60Hz (Dual power input)Потребляемая мощность :
*максимальная мощность :
19W (worst case, all ports used, line-rate traffic) (Watts)Энергопотребление в режиме ожидания :
12W (all ports link-down standby) (Watts)Энергоэффективный Ethernet (EEE) :
Yes (deactivated by default)Вентилятор :
FanlessЭкологические характеристики :
*Рабочая Температура :
-40° to 85°C (-40° to 185°F)Рабочая влажность :
95% maximum relative humidity (RH), non-condensingРабочая высота :
10,000 ft (3,000 m) maximumТемпература хранения :
-40° to 85°C (-40° to 185°F)Влажность при хранении (относительная) :
95% maximum relative humidity, non-condensingВысота хранения :
10,000 ft (3,000 m) maximumИсполнительный стандарт и защита :
*Молниезащита :
*МЭК61000-4-3 (РС) :
10V/m (80~1000MHz)FCC, часть 15/CISPR22 (EN55022) :
Class BМЭК 61000-6-2 :
Common Industrial StandardIEC61000-4-9 (импульсное магнитное поле) :
1000A/mIEC61000-4-10 (затухающие колебания) :
30A/m, 1MHzIEC61000-4-12/18 (ударная волна) :
CM 2.5kV, DM 1kVМЭК61000-4-4(ЭФТ) :
Power cable:±4kV, Data cable: ±2kVIEC61000-4-16 (синфазная передача) :
30V, 300V, 1sМЭК61000-4-2 (ЭСР) :
±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (Радиочастотная передача) :
10V(150kHz~80MHz)МЭК61000-4-8 :
100A/m, 1000A/m, 1s-3sIEC61000-4-5 (перенапряжение): силовой кабель :
CM±4kV/ DM±2kV, Data cable: ±4kVМеханические свойства :
*МЭК60068-2-6 :
Anti VibrationМЭК60068-2-32 :
Free FallМЭК60068-2-27 :
Anti ShockЭлектромагнитное излучение и иммунитет :
*Сертификаты :
CE mark, commercial; FCC Part 15 Class A, VCCI Class A; Class A EN 55022 (CISPR 22) Class A; Class A C-Tick; EN 55024; CCC; 47 CFR FCC Part 15, SubpartB, Class A ICES-003: 2016 Issue 6, Class A; ANSI C63.4:2014; IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013Безопасность :
*Сертификаты безопасности :
CB mark, commercial; CSA certified (CSA 22.2 #950); UL listed (UL 1950)/cUL IEC 950/EN 60950; EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 IEC 60950-1:2005 ;(ed.2)+A1:2009+A2:2013; AN/NZS 60950.1:2015; CCC (China Compulsory Certificate)Гарантия и поддержка :
*Ограниченная гарантия на оборудование :
Limited Lifetime*Техническая поддержка по телефону и электронной почте* :
Limited Lifetime*Круглосуточная онлайн-чат технической поддержки :
Limited Lifetime*содержимое пакета :
*Все модели :
Smart Industrial Switch ; Brackets and screws for DIN-Rail mounting, which are already installed in the switch; Rubber protection caps, which are already installed in the SFP sockets Installation guideВид бизнеса :
IndustrialБандридт :
1G+10GДополнительные фильтры :
L3 Managed
Questions & Answers
1. What devices can I connect with this 12 port gigabit Layer 3 managed industrial ethernet swtich?
This switch supports industrial devices such as automation systems, video surveillance cameras, IoT devices, and control networks, providing reliable high-speed connectivity for demanding environments.
2. What is the benefit of having 4 SFP+ uplink ports?
The 4 SFP+ ports allow for high-speed data transmission (up to 10Gb), providing flexible uplink options for scalable network designs, ensuring fast and reliable connectivity in large industrial networks.
3. How does the ERPS feature enhance network reliability?
The ERPS (Ethernet Ring Protection Switching) ensures network redundancy with a sub-50ms failover time, allowing quick recovery from link failures and minimizing downtime in critical industrial applications.
4. What is the operating temperature range of the IES7511-8GE4TF-DC?
The switch operates in extreme temperatures, ranging from -40°C to 85°C, making it suitable for both industrial and outdoor installations where environmental conditions are challenging.
5. Is the IES7511-8GE4TF-DC suitable for outdoor use?
Yes, the switch features an IP40-rated metal enclosure, providing protection against dust and debris, ensuring reliable operation in outdoor and rugged environments.
Related Products
-
IES7211-5FE-DC5 Ports Industrial Switch, 10/100M, DIN-Rail Mount, Redundant Power Input
-
IES7211-8FE-DC8 Ports 10/100M Industrial Switch, DIN-Rail Mount, Redundant Power Input
-
IES7211-8GE2GF-DC8 Ports Gigabit Industrial Ethernet Switch With 2 Gigabit SFP Uplink
-
IES7211-8GE4GF-DC12 Ports Gigabit Industrial Ethernet Switch With 4 Gigabit SFP Uplink